| Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
| cybercommander metering appears off? http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=1144 |
Page 1 of 1 |
| Author: | snitz [ Sun Jan 23, 2011 10:35 am ] |
| Post subject: | cybercommander metering appears off? |
I've set up my studio lights and the CC indicates a ap of F 4 (iso 100, sync 125th). The photos taken with this exposure are quite over exposed. Around f 6.3 seems about right. Can't figure what I'm doing wrong. I recently shot a basketball game (highschool arena) and had the same issue. The CC suggested light meter readings about 2 stops different than optimal. Suggestions: other than re-calibrate to add 2 stops? |
|
| Author: | Photodan [ Sun Jan 23, 2011 3:18 pm ] |
| Post subject: | Re: cybercommander metering appears off? |
Really stupid question, is the ISO setting the same on both meter and camera? I've done it before with my Sekonic. |
|
| Author: | snitz [ Mon Jan 24, 2011 12:18 am ] |
| Post subject: | Re: cybercommander metering appears off? |
Good question. I have both set for 100 ISO. |
|
| Author: | Luap [ Mon Jan 24, 2011 1:40 am ] |
| Post subject: | Re: cybercommander metering appears off? |
Something is wrong . . . check with Tech Help. CC meter tracks Sekonic within 1/10 to 2/10 over the full range. Also, f4 to f6.3 is 1 1/3 stops . . . still way out of range. |
|
| Author: | snitz [ Mon Jan 24, 2011 8:05 am ] |
| Post subject: | Re: cybercommander metering appears off? |
Thanks. Will call tech support this am! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|