| Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
| Unable to update firmware on einstein http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=1759 |
Page 1 of 1 |
| Author: | benjpa2 [ Sat Sep 10, 2011 5:52 pm ] |
| Post subject: | Unable to update firmware on einstein |
Hello, I am unable to get the einstein to accept the firmware update. When I follow the instructions (unplug the power cord, insert the card into the light, and plug the power cord in) all that happens is a single burst of the fan and no changes on the screen. Any advice? |
|
| Author: | Technical Support [ Sat Sep 10, 2011 5:57 pm ] |
| Post subject: | Re: Unable to update firmware on einstein |
It sounds like: A- You formatted the card to FAT32 on a PC or FAT on a MAC (the latter is FAT32) B- The card is SDHC (a.k.a. larger than 2GB) C-You have already updated one Einstein with that card. |
|
| Author: | benjpa2 [ Sat Sep 10, 2011 6:00 pm ] |
| Post subject: | Re: Unable to update firmware on einstein |
Technical Support wrote: It sounds like: A- You formatted the card to FAT32 on a PC or FAT on a MAC (the latter is FAT32) B- The card is SDHC (a.k.a. larger than 2GB) C-You have already updated one Einstein with that card. Thank you for the quick response. I have formatted the card to FAT32 on PC, it is a 4GB card, however this is my one and only Einstein... The odd part is that I do get a small burst from the fan that does not occur when there is no card inserted in the device, which leads me to think that it is recognizing that there is a card in it. My current build is #22 per the start up screen. Thanks, |
|
| Author: | Technical Support [ Sat Sep 10, 2011 6:57 pm ] |
| Post subject: | Re: Unable to update firmware on einstein |
That will do it. Max capacity of an SD card in an E640 is 2GB. It does recognize there is a card, but does not know what to do with it. |
|
| Author: | benjpa2 [ Sat Sep 10, 2011 7:00 pm ] |
| Post subject: | Re: Unable to update firmware on einstein |
Technical Support wrote: That will do it. Max capacity of an SD card in an E640 is 2GB. It does recognize there is a card, but does not know what to do with it. bingo... that did it thank you!! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|