| Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
| Einstein modeling lamp always on half power http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=1854 |
Page 1 of 1 |
| Author: | Brad.Casdorph [ Sat Oct 15, 2011 11:04 pm ] |
| Post subject: | Einstein modeling lamp always on half power |
Just received two Einstein units, including a cyber commander and two CSXCV's. Both units were working fine for +-35-40 flashes. The modeling lamp on #2 was originally set at 'sync model power with flash output'. At random it bumped the lamp to about 1/2 power and will not turn off. It will increase in output to full, but will not go below half power. Thought it might be the CC so I removed its battery. Also removed the CSXCV with no change. Also unplugged power from wall outlet for +-30 seconds. The flash appears fine. One other comment, the modeling lamp power bar stays about 2 stops below the flash bar when you adjust the flash output. Not sure what to do next? I read a similar post where it could be related to a pocket wizard, but since I have a CC I'm not sure. The other Einstein appears to be working fine (for now). Thanks for your help in advance. |
|
| Author: | rms956 [ Sun Oct 16, 2011 12:07 am ] |
| Post subject: | Re: Einstein modeling lamp always on half power |
After removing the CSXCV and leaving it out did you press the easy set button to see if everything returned to working order? RMS |
|
| Author: | Brad.Casdorph [ Sun Oct 16, 2011 9:55 am ] |
| Post subject: | Re: Einstein modeling lamp always on half power |
Pressed easy set wo/ CSXCV... no change in modeling lamp. Does reset other functions like its supposed to. Any other suggestions??? |
|
| Author: | Technical Support [ Mon Oct 17, 2011 4:40 pm ] |
| Post subject: | Re: Einstein modeling lamp always on half power |
This unit will have to come in for service. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|