Thanks for clearly answering my second question I'll try that out tonight.
First question: When I go to groups and I select ALL and remove the 3 green lines (disabling them all) the modelling lights go back to full power in two of my AB800 and it turns off with the other AB800. I also tried to disable them individually, Channel 1, 2 and then 3 and the same thing happens. I haven't tried the flash though, I'll need to try it tonight and will be back to you with more info. The sliders are far right, all buttons are pushed in. They were all set up the exact same way prior to installing the receiving device (I did it twice to ensure the set up was identical). The only light shutting down as supposed once it's disabled is not on a particular circuit and I tried to switch it with another one just to see and it does the same thing where ever I put it.
The receiving device (CSRB+) is plugged in only with the phone cord. The dummy plug is inserted in the AB800 but is not attached to anything else.
They are all set as ''Main'' in the description. I did that to ensure consistency in my tests.
Where ever I put it and what ever the channel/receiving device i'm using, it's always the same pattern when disabled from the group:
White AB800: Modelling light back to full power Green AB800: Modelling light back to full power Pink AB800: Modelling light disabled
On the light setting screen I'm on ''TRACK'' and the power in ''ON''. I disregarded the other 3 options as per the manual. If I change TRACK to FULL, they all change to FULL. If I change TRACK to OFF, two of them change to FULL and the pink on turns OFF...
The spec lights are set the same for the 3 strobes: SB800, 150W modelling lamps
I believe it sums it all, sorry for all the info but I thought it would be easier for you to help with all the info.
I'll come back with info about the flash, if in the mean time you have any idea what it could be don't hesitate to let me know.
Thanks
Etienne
|