Paul C. Buff, Inc. Technical Forum
http://www.paulcbuff-techforum.com/

New pocket wizard pluslll and white lighting
http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=3424		 Page 1 of 1
Author:  Starlite Studios [ Tue Feb 21, 2012 9:54 am ]
Post subject:  New pocket wizard pluslll and white lighting
I have a question someone here may know.
Using Nikon D700 and the new pocket wizard plus lll's in the studio
I have white lighting 1800's and 3200's will need or work out best way to get them all working together. I know the plus 3's are brand new ( mine are sitll in shipping) but if anyone is using the plus 2's it will give me a starting point.

PS. On location I can use the Nikon CLS system untill I need more light then back to the pocket wizard.

Any thoughts or ideas will help, Thanks.
Dan Turner Starlite Studios
Author:  Technical Support [ Tue Feb 21, 2012 10:06 am ]
Post subject:  Re: New pocket wizard pluslll and white lighting
First, you will need a mono cord from reciever to light. As with any radio system, you will need a minimum of one transmitter and one reciever, letting the remaining lights fire using the optical slave. However, a more fail-safe approach is to have a reciever on each light.
Author:  Starlite Studios [ Tue Feb 21, 2012 11:23 am ]
Post subject:  Re: New pocket wizard pluslll and white lighting
Technical Support wrote:
First, you will need a mono cord from reciever to light. As with any radio system, you will need a minimum of one transmitter and one reciever, letting the remaining lights fire using the optical slave. However, a more fail-safe approach is to have a reciever on each light.


Perfect, You guys make everything so easy I will never know why other companys even try to make lights. Once again Thank you so very much.
Author:  Technical Support [ Tue Feb 21, 2012 11:48 am ]
Post subject:  Re: New pocket wizard pluslll and white lighting
One more thing. The mono cord must be 1/8" to 1/4" and non attenuating. If you buy it from a photo supplier, you should get the right thing. If you get it from Radio Shack, you need to be careful.
Author:  Starlite Studios [ Tue Feb 21, 2012 2:11 pm ]
Post subject:  Re: New pocket wizard pluslll and white lighting
Technical Support wrote:
One more thing. The mono cord must be 1/8" to 1/4" and non attenuating. If you buy it from a photo supplier, you should get the right thing. If you get it from Radio Shack, you need to be careful.


THANK YOU! I will buy for good photo supplier, Old age and a few mistakes have tought me you most often get what you pay for and I would rather spend my money inside the trade with people I can trust.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/