blackace45 wrote:
Thank you for the info I 'm running the latest firmware for the Power MC2 and there is a current beta firmware for the Power MC2, I just double check the support page with PW as we speak. Also aware of the position of the modeling light control tab on the L-478 when I use the tab it only dim the modeling not off again thank you hopefully PW will have a new firmware soon to correct and address this problem will download the beta firmware just might do the trick thank you. :D :D [color=#FF0000][color=#FF0000]Fireware update work problem solved[/color][/color]
Thanks for the info! I am having the same issue (just got my E640 and Power MC2 today) and was putting it through it's paces and noticed the modeling lamp would go to about 1W instead of all the way off using Firmware 2.200 and Sekonic L-478DR. Will upload Beta 2.218 and try again.
BTW, what a great system this makes! I can't wait to try it out this weekend for an outside shot. I got the Vagabond Mini as well. Thanks PCB!
Regards,
Craig
Edit: Downloaded and installed the Beta firmware for the Power MC2. It fixed the modeling lamp issue and now the Sekonic L-478DR turns it completely off. Everything else works as expected.