| Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
| Dented the grid in y snoot. http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=4414 |
Page 1 of 1 |
| Author: | Mack [ Wed Apr 09, 2014 12:29 pm ] |
| Post subject: | Dented the grid in y snoot. |
Somehow in my case, the 20 degree grid on the back of the snoot got dented and the honeycomb is a bit smashed on one area. Is that part available, or is there a way to flatten it out again? Tia. Mack |
|
| Author: | Technical Support [ Wed Apr 09, 2014 12:56 pm ] |
| Post subject: | Re: Dented the grid in y snoot. |
Depending on the dent size and location, it may not matter much. I would test it to see how it affects the light pattern. If it does, we may have a salvaged one here. I doubt it, but it is possible. Contact Customer Service to see if they have any. Otherwise (and I have not tested this myself), you can place a round 20 degree grid in the UMF. I imagine this to be very similar, if not identical. You can also swap out for different grids for different effects. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|