| Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
| How to clear internal memory 1 and 2 on cyber commander ? http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=4751 |
Page 1 of 1 |
| Author: | jean b. [ Fri May 01, 2015 10:11 am ] |
| Post subject: | How to clear internal memory 1 and 2 on cyber commander ? |
hi, If I turn on my cyber commander, in the presence of no Einstein units , and I open from studio lights, no bar is visible, wich is what is expected. But if I open from memory 1 or 2, I still see the power bars from my last shoot. Thing is, I did not save this last shoot configuration . thanks jb |
|
| Author: | Technical Support [ Fri May 01, 2015 3:29 pm ] |
| Post subject: | Re: How to clear internal memory 1 and 2 on cyber commander |
There is not a way to clear it, per se. But, you can open, say SD50 or 49 or SD 1 or some other location that has nothing saved, then save that nothingness to Internal1 and/or 2. Just keep in mind this may change your frequency and to set it back when you are all done. Also, I recommend saving at least one real set up. This would serve as a reset should something get askew. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|