Paul C. Buff, Inc. Technical Forum http://www.paulcbuff-techforum.com/ |
|
Honeycomb Grid on Moonunit http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=4907 |
Page 1 of 1 |
Author: | sharkguy [ Wed Mar 23, 2016 12:01 pm ] |
Post subject: | Honeycomb Grid on Moonunit |
Just added a cheap ($9.00) 80 cm grid I bought off eBay to my 30" moonunit. Obviously it wasnt made for the moonunit, but I was able to attach it. I will have to do some slight modification to make it easier to attach and remain attached. I added the front diffusion panel before I added the grid. Wanted to try this to control light spill from the moonunit. I then trigger the ABR800 with radiopoppers. I am doing this since the ABR800 is my only studio strobe. since the ABR800 is versatile I also use it with PLM's and with Vagabond Mini I use Ken Wheeler mod to use for events. I havent really put it through the test to a great extent. Am I barking up the wrong tree or would this be helpful. I wanted to have a gridded octabox for the ABR. Here is setup: https://www.flickr.com/photos/yachtclub/25373791404/ Here is first test shot and explanation what I was trying to do: https://www.flickr.com/photos/yachtclub/26006487565/ Thanks, Tom |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |