Tim_S_Photography wrote:
Alternatively, is there a convenient way (other than the PC sync cord between the 3rd party meter and the specific light) to use a third party meter to trigger individual lights during metering?
Could I use the CC to adjust light power as normal but for metering purposes, trigger the individual light/channel to fire by connecting the CC to a PC cord attached to the third party meter?
Unless you are setting each light up in its own group, then triggering via PC cord will fire all lights at once. I would use the meter in cordless (which is different than "wireless") mode. Press the meter button, and the meter will wait for a flash. You can select any channel and fire via joysticks to individually fire each light independently.