|
Site Admin |
Joined: Tue Dec 08, 2009 10:43 am Posts: 5266
|
It sounds like you have a Cyber Commander in play. If the lights were set to ACTION on the lights themselves, but are set to COLOR in the Cyber Commander, it is the job of the Cyber Commander to command the lights to return to the settings it has programmed.
To remedy this, you can cahnge the setting in the Cyber Commander in the SETUP>LIGHT SETINGS>COLOR MODE= ACTION MODE
Alternatively, you can set the setting on the light, then reopen the light(s) in the OPEN MEMORY menu.
|
|