Paul C. Buff, Inc. Technical Forum
http://www.paulcbuff-techforum.com/

Do adapters exist to use Elinchrom Rotalux
http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=83		 Page 1 of 2
Author:  russellm [ Tue Dec 29, 2009 12:38 pm ]
Post subject:  Do adapters exist to use Elinchrom Rotalux
Subject has my question.

Does anyone know of an adapter made that allows the Elinchrom Rotalux Octa to be used on PCB monolights? (I am assuming the Einstein will use the same adapter as the current PCB lights)

Thanks
Russell
Author:  Luap [ Tue Dec 29, 2009 1:33 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
Not that I'm aware of. Yes, Einstein uses and improved version of the AB/WL connector.
Author:  russellm [ Tue Dec 29, 2009 1:39 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
thanks Paul.

test test test.... We want your Einsteins now!
Author:  Technical Support [ Tue Dec 29, 2009 1:42 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
do you know the outer diameter of the Rota speedring (where the rods would go)?

TS
Author:  russellm [ Tue Dec 29, 2009 1:49 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
unfortuately no I do not.

I am just in the process of purchasing my lighting setup and I have read a lot of great things about the Elinchrom Octa bank. So as part of my due diligence, I am just trying to figure out if I could use one of those with the Einsteins I plan to buy.

I did find a company called "Kacey Enterprises" that appears to make an adapter that allows the Alien Bee to use the Elinchrom Beauty Dish.

Thanks
Russell
Author:  Technical Support [ Tue Dec 29, 2009 2:14 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
it has been my experience that while the speed ring is not necessarily adaptable, most speedrings from quality suppliers have the the same diameter. It is possible our speedring would fit the softbox, though it may not. Alternatively, Chimera may make one that would work.

TS
Author:  russellm [ Wed Dec 30, 2009 2:01 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
Just to close on this, I had a few email exchanges with Kacey Enterprises and his company does make adapters to allow PCB lights to use Elinchrom Modifiers. This is great, as that means I get the best of both worlds.

Thanks
Russell
Author:  dmward [ Wed Dec 30, 2009 7:02 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
Here is a link to a site with an adaptor that permits attaching Elinchrom modifiers to AB lights.

http://www.kaceyenterprises.com/
Author:  kilonad [ Thu Dec 31, 2009 12:00 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
Have you guys ever thought about making a line of speed ring adapters that would fit different brands of modifiers to your lights, and then selling them through your website?

There are so many speed rings on B&H's website, and they're all virtually identical. I can't tell what the difference is between the Mola adapter for AB/WL (BH part #MOSRB) and the Photoflex adapter for AB/WL (BH part #PHSRB), other than the Mola is $24 more expensive.

Are there legal hurdles to making these (liability, patents, etc.)? Or is it just not economically viable?
Author:  Technical Support [ Mon Jan 04, 2010 12:09 pm ]
Post subject:  Re: Do adapters exist to use Elinchrom Rotalux
A speed ring for a softbox is different than the adapter for a Mola. The image for the Mola adapter appears to be incorrect. It appears to be just a speedring. If you look at adapters for other brands, it becomes fairly clear that it is wrong, and also shows how they work. I cannot answer about the adapters for other brands, other than our speedrings do seem interchange with many, if not most, quality softboxes. Additionally, so many companies make so many modifiers, with so many interfaces for the adapters, it would not be in our interest to accomodate all of them.

TS
Page 1 of 2 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/