Paul C. Buff, Inc. Technical Forum

My CC stop working , won't come on at all, after doing a small shoot I was changing a little step up and did a light meter check and as soon as I popped the strobe it went dead, any suggestion.. !

Check the battery contacts, I've dropped mine and the metal tabs had to be smooshed back into place to hold one of the two batteries tight. That's what i would guess.

If the batteries were simply low, it might go into a reset mode because of the voltage drop. Black screen, White screen, etc.

try removing the memory card.

TS, Thanks that worked everything seems to be working , I will have to remember that..
Kgf

That is indicative of a corrupt memory card, which should be replaced (or if you do not save more than 2 set ups, removed)

I do not save any of my setups so I will remove it ,, Thanks for all your help!

KGF