Paul C. Buff, Inc. Technical Forum
http://www.paulcbuff-techforum.com/

Sekonic meters and CyberSync
http://www.paulcbuff-techforum.com/viewtopic.php?f=8&t=948
Page 1 of 2

Author:  idaband [ Thu Oct 21, 2010 1:06 pm ]
Post subject:  Sekonic meters and CyberSync

Sekonic has the ability to host a poketwizard trigger. Any word on building a CyberSync module for them?

Or anyone else have a nice way to remotely trigger while using the seconic meter?

Author:  Technical Support [ Thu Oct 21, 2010 1:35 pm ]
Post subject:  Re: Sekonic meters and CyberSync

No integrated option is available for Sekonic meters, and such a device is unlikely at this time. You can either connect the cord that is included with the CST to connect with the meter. Alternatively, you can set the meter to cordless, press the arm button, and fire the flashes with the CST in the other hand.

Author:  fredr500 [ Thu Oct 21, 2010 1:57 pm ]
Post subject:  Re: Sekonic meters and CyberSync

The second option worked fine for me as I was testing my CC and Sekonic. They were spot-on, no calibration needed.

Author:  idaband [ Thu Oct 21, 2010 2:03 pm ]
Post subject:  Re: Sekonic meters and CyberSync

Technical Support wrote:
No integrated option is available for Sekonic meters, and such a device is unlikely at this time. You can either connect the cord that is included with the CST to connect with the meter. Alternatively, you can set the meter to cordless, press the arm button, and fire the flashes with the CST in the other hand.


Image

so ...Lets play the what if... what options do we have here...

Have 1 radio transmitter at 1, and one on 3. Have one reciever on 2, and allow three to slave off.

That comes to:
CST CyberSync™ Trigger Transmitter X2 @ $60
CSR+ CyberSync™ Receiver Plus - AC Powered x1 @90

gives us a total of $210.

OR


we switch it up...
2 Transmitters @$60
and get 2 CSXCV CyberSync™ Transceiver @$30

That gives us a total of $120.


or third option:
1 Cyber Commander™ @ $150
1 transmitter @$60
2 Transceivers @ $30

Thats a total of @$270


Would the last option let me get rid of my Sekonic since the Cyber Commander has a built in metering?

Choices overload :)

Author:  Cliffmurphy [ Thu Oct 21, 2010 4:35 pm ]
Post subject:  Re: Sekonic meters and CyberSync

haha. Nice!

I use your 3rd option. Have both CST on camera and CC in hand.

Author:  FotoWFlash [ Thu Oct 21, 2010 6:08 pm ]
Post subject:  Re: Sekonic meters and CyberSync

Hi,

I also use the third option but with 2 CSRB+.
It is a bit more expensive but I can use them outdoor with speedlights or with AB strobes.

Regards.

Author:  RDKirk [ Fri Oct 22, 2010 9:08 am ]
Post subject:  Re: Sekonic meters and CyberSync

Quote:
Would the last option let me get rid of my Sekonic since the Cyber Commander has a built in metering?


Yes.

The CC has retired my Sekonic L-358. I still keep my L-558 for non-flash spotmetering. But I plan to put my L-358 on eBay and buy another CC.

Author:  Technical Support [ Fri Oct 22, 2010 10:16 am ]
Post subject:  Re: Sekonic meters and CyberSync

Well, your options span more than one line of lights. If you have Einsteins, then option 1 is not the best option, as it is more expensive and would limit CyberCommander. If you have Bees or White Lightnings, then the CSXCV's would not work at all. Again, if using AB or WL, then option 1 would not benefit from the + model reciever, unless you plan on Cyber Commander in the future.

Author:  idaband [ Fri Oct 22, 2010 11:50 am ]
Post subject:  Re: Sekonic meters and CyberSync

RDKirk wrote:
The CC has retired my Sekonic L-358. I still keep my L-558 for non-flash spotmetering. But I plan to put my L-358 on eBay and buy another CC.



PM me if yoiu plan on selling anytime soon. Actually looking to get another meter. I'm scared of getting ebay ones... Never know how well they work. (not sure if we have any swap area on the Forum)

Author:  Technical Support [ Fri Oct 22, 2010 12:24 pm ]
Post subject:  Re: Sekonic meters and CyberSync

we do not have a dedicated swap area, nor a PM function. I am not going prohibit exchanging of information for the purposes of selling, unless this board turns into a giant swap meet.

Page 1 of 2 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/